Ipata Resistant HDPE Pipe Silicon Duct
Fidio ọja
Apejuwe
HDPE Silicon Duct jẹ iru okun ibaraẹnisọrọ opitika (itanna) ti o daabobo ọpọn, eyiti o jẹ iṣelọpọ ati apẹrẹ nipasẹ fifin ohun elo ohun elo alumọni-mojuto pẹlu olusọdipúpọ kekere kekere laarin paipu HDPE.Nitorinaa paipu silikoni-core HDPE n pese irọrun fun okun ti o dubulẹ nitori eefin ti o lagbara ti lubricating pẹlu agbara ati iye-iye frication kekere.O di aabo okun opiti ti ilọsiwaju julọ ni agbaye ni lọwọlọwọ.Ilọsiwaju rẹ ti gbekalẹ lori rirọpo ti fifa okun ti ara ẹni.
Ẹrọ fifẹ okun yoo fẹ okun naa sinu idinku kekere HDPE pipe ati okun naa lọ siwaju ni iyara giga ni ipo idaduro.Ọna fifisilẹ okun yii yago fun awọn bibajẹ okun ti o fa nipasẹ fifa.Fun iyẹn, ipadanu ifihan airotẹlẹ ti o fa nipasẹ fifa ẹrọ ti dinku pupọ ati pe ọpọlọpọ awọn koko ti o waye lati opin ipari gigun ti dinku pupọ.Ni akoko kanna, awọn iwọn ti n walẹ daradara ti dinku ati pe a ti fipamọ iye owo iṣẹ akanṣe.
HDPE Silicon Duct ni kikankikan giga, ohun-ini ti o dara julọ ti o koju giga tabi iwọn otutu kekere, isọdọtun fun giga ati awọn iyipada atunse.
Awọn anfani:
- Ko si wahala ni ijinna to munadoko ti okun fifun eyikeyi diẹ sii ati fi idiyele ti fifun okun;lori aaye ikole ko nilo ẹrọ fifun, compressor ati awọn ẹgbẹ fifin okun, bbl eyikeyi diẹ sii.
- Gije kikuru akoko ikole, sisọnu yàrà jẹ rọrun ati pe iṣoro ti o wa ni opin ilẹ yoo yanju, ie, gbigbe gbigbe ati gbigbe okun le ṣee ṣe ni akoko kanna niwọn igba ti o ba fi PCD sinu yàrà ti a gbẹ ati ẹhin.
- Din idiyele ti awọn iṣẹ akanṣe, pẹlu fifipamọ awọn ẹru omi okun ti duct ati okun, ati ikole.
| Nkan No. | ÒKÒ | Awọn ohun elo aise | Iwọn | Ti ara ati Kemikali Properties | |||||||||||||||||
| Awọn ohun elo | Opin (D/d) | Awọn aṣayan Awọ | Inu Dada | Yo Fow Atọka | iwuwo | Agbara Fifẹ Ni Ikore | Elongation Ni The Bireki | Ayika Wahala Crack koju (F50) | Lode Dia. (mm) | Sisanra Odi (mm) | Ovality (%, ṣaaju ki o to ṣajọ) | Lile ti Lode odi (Okun-D) | Ti abẹnu Co-daradara ti edekoyede | Agbara Fifẹ ni Ikore | Elongation ni Bireki | Max nfa Fifuye | Titẹ Radius Lẹhin Itutu | Oruka Digidi | Iyipada Gigun | Agbara afẹfẹ | |
| DW-SD2720 | HDPE (Polyethylene iwuwo giga) | 27.0mm / 20.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 27.0 (-0.0, +0.3) | 3.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥500% | ≥4500N | 560mm | ≥30kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD2824 | HDPE (Polyethylene iwuwo giga) | 28.0mm / 24.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 28.0 (-0.0, +0.3) | 2.00 (-0.2, +0.20) | ≤7 | ≥59 | ≤0.12 | ≥21MPa | ≥500% | ≥2800N | 560mm | ≥30kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD3225 | HDPE (Polyethylene iwuwo giga) | 32.0mm / 25.0mm | Dudu tabi ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 32.0 (-0.0, +0.3) | 3.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥5000N | 300mm | ≥40kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD3226 | HDPE (Polyethylene iwuwo giga) | 32.0mm / 26.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 32.0 (-0.0, +0.3) | 3.00 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥5000N | 300mm | ≥40kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD3227 | HDPE (Polyethylene iwuwo giga) | 32.0mm / 27.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 32.0 (-0.0, +0.3) | 2.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥4000N | 300mm | ≥30kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD3228 | HDPE (Polyethylene iwuwo giga) | 32.0mm / 28.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 32.0 (-0.0, +0.3) | 2.10 (-0.2, +0.20) | ≤7 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥3000N | 400mm | ≥50kN/m2 | ≤3.0% | 1.2MPa |
| DW-SD3326 | HDPE (Polyethylene iwuwo giga) | 33.0mm / 26.0mm | Ni kikun awọ | Dan pẹlu ohun alumọni tabi Inu ribs pẹlu ohun alumọni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 33.0 (-0.0, +0.3) | 3.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥5000N | 300mm | ≥40kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD3832 | HDPE (Polyethylene iwuwo giga) | 38.0mm / 32.0mm | Ni kikun awọ | Dan | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 38.0 (-0.0, +0.3) | 3.00 (-0.2, +0.20) | ≤7 | ≥59 | ≤0.12 | ≥21MPa | ≥400% | ≥6000N | 440mm | ≥30kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD4032-RIBS | HDPE (Polyethylene iwuwo giga) | 40.0mm / 32.0mm | Ni kikun awọ | Awọn egungun inu pẹlu ohun alumọni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 40.0 (-0.0, +0.4) | 4.00 (-0.00, +0.35) | ≤5 | ≥59 | ≤0.08 | ≥21MPa | ≥500% | ≥8500N | 480mm | ≥50kN/m2 | ≤3.0% | 2.5MPa |
| DW-SD4032 | HDPE (Polyethylene iwuwo giga) | 40.0mm / 32.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 40.0 (-0.0, +0.4) | 4.00 (-0.00, +0.35) | ≤5 | ≥59 | ≤0.08 | ≥21MPa | ≥500% | ≥8500N | 480mm | ≥50kN/m2 | ≤3.0% | 2.5MPa |
| DW-SD4033 | HDPE (Polyethylene iwuwo giga) | 40.0mm / 33.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 40.0 (-0.0, +0.3) | 3.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 (Ayiyi) ≤0.25 (aimi) | ≥21MPa | ≥500% | ≥8000N | 400mm | ≥50kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD4034 | HDPE (Polyethylene iwuwo giga) | 40.0mm / 34.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 40.0 (-0.0, +0.3) | 3.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥6000N | 400mm | ≥30kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD4035 | HDPE (Polyethylene iwuwo giga) | 40.0mm / 35.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 40.0 (-0.0, +0.3) | 3.50 (-0.1, +0.20) | ≤10 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥3000N | 500mm | ≥20kN/m2 | ≤3.0% | 1.2MPa |
| DW-SD4233 | HDPE (Polyethylene iwuwo giga) | 42.0mm / 33.0mm | Ni kikun awọ | Awọn egungun inu pẹlu ohun alumọni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 42.0 (-0.0, +0.4) | 3.85 (-0.00, +0.30) | ≤7 | ≥59 | ≤0.1 | ≥21MPa | ≥500% | ≥12000N | 800mm | ≥30kN/m2 | ≤3.0% | 2.5MPa |
| DW-SD4236-RIBS | HDPE (Polyethylene iwuwo giga) | 42.0mm / 36.0mm | Ni kikun awọ | Awọn egungun inu pẹlu ohun alumọni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 42.0 (-0.0, +0.4) | 3.00 (-0.00, +0.30) | ≤7 | ≥59 | ≤0.1 | ≥21MPa | ≥500% | ≥8000N | 500mm | ≥30kN/m2 | ≤3.0% | 2.5MPa |
| DW-SD4638 | HDPE (Polyethylene iwuwo giga) | 46.0mm / 38.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 46.0 (-0.0, +0.3) | 4.00 (-0.20, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥10000N | 1000mm | ≥30kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD5041 | HDPE (Polyethylene iwuwo giga) | 50.0mm / 41.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 50.0 (-0.0, +0.4) | 4.50 (-0.30, +0.30) | ≤7 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥12000N | 1000mm | ≥30kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD5042-RIBS | HDPE (Polyethylene iwuwo giga) | 50.0mm / 42.0mm | Dudu tabi adani | Awọn egungun inu pẹlu ohun alumọni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 50.0 (-0.0, +0.4) | 4.00 (-0.20, +0.20) | ≤7 | ≥59 | ≤0.1 | ≥21MPa | ≥400% | ≥12000N | 600mm | ≥30kN/m2 | ≤3.0% | 2.5MPa |
| DW-SD5042 | HDPE (Polyethylene iwuwo giga) | 50.0mm / 42.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 50.0 (-0.0, +0.4) | 4.00 (-0.30, +0.30) | ≤7 | ≥59 | ≤0.12 | ≥21MPa | ≥400% | ≥12000N | 1000mm | ≥30kN/m2 | ≤3.0% | 1.6MPa |
| DW-SD5043 | HDPE (Polyethylene iwuwo giga) | 50.0mm / 43.0mm | Ni kikun awọ | Dan Pẹlu Silikoni | 0.1 ~ 0.3 g / iṣẹju 10 (190 C, 2.16KG) | Min.0,940 g / cm3 | Min.21MPa | Min 350% | Min.350 wakati | 50.0 (-0.0, +0.4) | 3.50 (-0.1, +0.25) | ≤7 | ≥59 | ||||||||
awọn aworan
Iṣakojọpọ
ọja Igbeyewo
Awọn iwe-ẹri
Ile-iṣẹ Wa
Kọ ifiranṣẹ rẹ nibi ki o si fi si wa
